Factory-direct · Danyang, Jiangsu, China

FeCrAl, NiCr & CuNi resistance wire — made in our own factory since 1990

Jiangsu Heyi manufactures heating and resistance alloys to the standard applicable to each product family, for industrial furnaces, heating elements, appliances and precision resistors. ISO 9001:2015 certified, SGS-tested, with evaluation samples and engineering support in English.

  • Published resistivity & Ct data for every grade
  • MOQ from 10 kg · 3–5 week lead time
  • Engineering support in English
Since 1990Formerly Danyang Resistance Wire FactoryCompany record
ISO 9001:2015QMS certificate 12426Q00125R201GB/T 19001-2016 / ISO 9001:2015
SGS testedEU RoHS: 4 alloy groups · SVHC: nickel wireReports dated Oct 2026
GB/T 1234-2012FeCrAl / NiCr heating alloy standardEach family's standard is on its page
Products

Resistance alloys by series and by form

Twelve FeCrAl and NiCr grades, eleven CuNi grades, pure nickel, strip, flat wire, stranded rope and finished heating elements. The applicable standard is listed on each product page; rope and finished elements are built to your drawing.

FeCrAl resistance wire manufactured by Jiangsu Heyi

FeCrAl resistance wire

Iron-chromium-aluminium grades up to 1400 °C. Eight grades including 0Cr25Al5, 0Cr21Al6Nb and 0Cr27Al7Mo2.

NiCr resistance wire manufactured by Jiangsu Heyi

NiCr resistance wire

NiCr 80/20, 70/30, 60/15 and 35/20. Ductile in service, no high-temperature embrittlement.

CuNi and precision alloys manufactured by Jiangsu Heyi

CuNi & precision alloys

Eleven CuNi grades from 0.03 to 0.50 µΩ·m, plus constantan and precision resistance wire.

Strip, ribbon and flat wire manufactured by Jiangsu Heyi

Strip, ribbon & flat wire

Rolled strip and flat wire for ribbon elements, with Ω/m and m/kg tables in the datasheets.

Pure nickel wire manufactured by Jiangsu Heyi

Pure nickel wire

Nickel 200/201 wire and stranded nickel for connectors and high-temperature leads.

Heating elements manufactured by Jiangsu Heyi

Heating elements

Coil, ribbon and tubular elements built from our own alloy wire and strip.

Why Heyi

What buying direct from the factory actually changes

For engineering buyers, the difference is not the brochure — it is whether the numbers on the drawing match the wire that arrives.

1

One factory, one quality system

Wire drawing, annealing and strip rolling are done in our own plant in Danyang, Jiangsu. The quality management system is certified to GB/T 19001-2016 / ISO 9001:2015 (Reg. 12426Q00125R201).

2

Traceable material data

Every grade has a 2026 English datasheet with chemical composition, resistivity by wire diameter, density, Ct temperature factors and Ω/m tables — so your engineers can design against published numbers.

3

Verified compliance

SGS EU RoHS 2015/863 testing covers FeCrAl, NiCr, CuNi and nickel wire (Oct 2026). A separate SVHC screening covers a nickel wire sample. We state exactly what each report covers.

4

Built for export orders

Evaluation samples, MOQ from 10 kg on fine wire, and typical lead times of 3–5 weeks depending on quantity. Each product family has its own applicable standard.

Inside the plant

See the production lines

Short clips from our wire drawing and annealing workshops. Videos load only when you press play, so the page stays fast on overseas connections.

Jiangsu Heyi workshop
Jiangsu Heyi workshop
Jiangsu Heyi workshop
Engineering tools

From a voltage and a target power to the length of wire you need

Our alloy selection tool uses the resistivity, density and Ct temperature-factor tables published in our 2026 datasheets — 23 grades, no guessed constants. It calculates resistance, current, wire length, Ω/m, mass, surface load and the effect of working temperature, then carries the whole configuration into your enquiry.

Open the selection tool View certificates

FAQ

Questions buyers ask first

What is your minimum order quantity?

10 kg for fine wire below 0.5 mm and for flat wire; 100 kg for coarse wire, ribbon/strip and rod.

How long is the lead time?

Typically 3–5 weeks depending on the order quantity. Confirm the schedule with our sales team when you enquire.

Can I get a datasheet before ordering?

Yes. Every grade has a downloadable 2026 English datasheet — no form, no email gate.

Do you support OEM / ODM and samples?

OEM / ODM projects are available for stranded heating rope and heating elements; other families are produced to their applicable standards. Evaluation samples are available on request.

Read the full FAQ →

Ready to specify your alloy?

Send the grade, size and quantity. Our engineers will confirm suitability and come back with a technical and commercial offer.

WhatsApp